Industry Information

Update May 24, 2022

Belt deviation is the most common failure when the belt conveyor is running. In order to solve such failures, it is important to pay attention to the dimensional accuracy of the installation and...

Update March 21, 2022

Introduction to gas spring

Gas spring is an industrial accessory that can support, cushion, brake, height adjust and adjust angle. It consists of the following parts: pressure cylinders, piston rods, pistons, seal guide...

Update March 19, 2022

Gas spring support rod installation steps

Nine installation steps of the gas spring support rod The gas spring piston rod must be installed in a downward position and must not be flipped. This will reduce friction and ensure the best damping...

Update March 19, 2022

Gas spring characteristics

The gas spring is a kind of liftable spring that can save labor. It can be divided into self-locking gas springs (such as the bottom lift of the seat, the backrest of the boss chair, etc.), and the...

Update March 19, 2022

Research on gas spring funnel type auxiliary device

The new air spring structure adopting the hourglass-type auxiliary spring has the same structure, and the air spring is composed of a combination of a screw seal and a pressure self-sealing. The...

Update March 18, 2022

NSK develops tensioner with ball bearing

NSK developed the tensioner bearings for the idler pulley used in the auxiliary machine belt. By improving the seals, both high speed resistance and high sealing performance are achieved. The idler...

Update March 18, 2022

Heated gas spring to drive the sealing technique

As shown in the original inflation method, the rubber column 6 is pre-stressed to block the air passage, and the pressure of the air source against the elastic force of the rubber column is used to...

Update March 17, 2022

How to judge the quality of a gas spring

Judging the quality of a gas spring is mainly considered from the following aspects: First, its sealing property, if the sealing is not good, oil leakage and gas leakage will occur during use;...