Gas spring support rod installation steps

March 19, 2022

Nine installation steps of the Gas Spring support rod The gas spring piston rod must be installed in a downward position and must not be flipped. This will reduce friction and ensure the best damping quality and cushioning performance.
2. The gas spring is a high-pressure product and it is forbidden to analyze, fire, and bump it.
3, gas springs should not be subject to tilt or lateral force in the work. Can not be used for handrails.
4. It is determined that the fulcrum installation position is a guarantee that the gas spring can work correctly. The gas spring must be installed in the correct way. That is, when it is closed, let it move through the centerline of the structure. Otherwise, the gas spring will often push the door open automatically.
5. To ensure the reliability of the seal, do not damage the surface of the piston rod. It is forbidden to apply paint and chemical substances on the piston rod. It is also not allowed to spray or paint after the gas spring is installed at the desired position.
6, the use of ambient temperature: -35 °C - +70 °C. (Specific manufacturing 80°C)
7, gas spring piston rod is strictly prohibited to rotate to the left. If you need to adjust the joint direction, you can only turn to the right.
8. Install the connection point, it should be flexible and can not be stuck.
9, choose a reasonable size, the size of the force to be appropriate, the piston rod stroke size to leave 8 mm margin.

The above is the Gas spring support rod installation steps we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Introduction to gas spring

Next:Gas spring characteristics